Flag and decorative fabric
Flag fabric 110g
Flame retardant material
The flag fabric with a weight of 110g/sqm is ideal for outdoor use. Even if wind and weather pull at the flag, the low weight prevents the fabric from wearing out quickly at the eyelets or hemstitch. This significantly increases the service life. The polyester material is B1-certified and therefore flame-retardant.
Further processing of flag fabric
This guarantees maximum security. The printed motif shines through on the opposite side, so that your motif advertises in both directions. Of course, you can choose from a wide range of finishing options (eyelets, hemstitching, etc.). The format is freely selectable and starts at small dimensions and quantities of 1. ATTENTION: If you want eyelets/hemstitching, allow for 5 cm more material all round when creating the print file. With a 5 cm hemstitch, you should allow for 10 cm more fabric all round. It is best to place important information or logos 15 cm away from the edge so that nothing of your message is lost.
Decorative fabric 220g
The decorative fabric with its weight of 220g/sqm is made for both indoor and outdoor use. The waterproof polyester can withstand any weather and the UV-resistant printing ink prevents fading caused by sunlight. Outdoors, the relatively low weight ensures that the eyelets and hemstitching do not wear out so quickly. However, the flag fabric with 110g/sqm is recommended for constant strong weather conditions, as the wind forces have less influence. The 220 decorative fabric is also a good choice for indoor use. It is almost opaque and B1-certified, i.e. flame-retardant. Maximum safety is therefore guaranteed.
Possible applications are trade fairs, the point of sale/checkout area, etc. The format is freely selectable, eyelets and hemstitching are available for further processing. The maximum print width for decorative fabric is 152 cm. ATTENTION: If you want eyelets/hemstitching, allow for 5 cm more material all round when creating the print file. With a 5 cm hemstitch, you should allow for 10 cm more fabric all round. It is best to place important information or logos 15 cm away from the edge so that nothing of your message is lost.